Turn PET Bottles Into 3D Printer Filament: The Printable Recycler Machine
How this guide was made: this is our own file set, designed in our shop and modelled from a reference build. Several dimensions are estimates from that build and are marked "ASSUMED" in the build guide, with a measure-and-adjust table — which is exactly why the set is parametric and why we tell every buyer to print one proof piece before the full set. This post describes the design and the build honestly; it is not a promise of factory-grade filament.
Every maker household throws away a steady supply of PET soda and water bottles — and buys 1.75mm filament by the kilogram. A bottle-to-filament recycler closes that loop: cut a bottle into one long spiral strip, pull the strip through a heated printer nozzle block so it forms into round filament, cool it with a fan, and wind it onto a spool with a small geared motor. The machine itself is mostly 3D printed, and it is built around cheap, standard printer parts most makers already have in a drawer.
How the machine works
The strip enters through a guide arm and roller, passes through an MK8/CR-10-style heater block fitted with a large-bore M6 nozzle, and comes out the other side as round 1.75mm filament. A panel temperature controller holds the block at temperature, a 4010 fan cools the formed filament, and a geared spool — a 64:16 gear pair driven by a small 24V gear motor — winds it up slowly and with enough torque to pull the strip through at a steady rate. A PWM controller sets the motor speed. Everything mounts on a printed base enclosure with a front faceplate that carries the temperature controller and the speed knob.
What you print
The set is 14 STL files, 15 printed pieces (the bearing stand prints twice):
- Base enclosure, front controller faceplate, and top deck plate
- Geared spool flange, plain spool flange, and spool drum core
- Pinion gear and two bearing stands
- Motor bracket, hotend slide plate, and hotend bracket
- Guide arm, guide roller, and fan grill
Material choice matters more than usual here. The hot-zone parts — the hotend bracket and slide plate — must be ASA or PC only: they live next to a 240–260°C block, and PLA or PETG will creep. Structural parts (gears, stands, spool) want PETG at minimum, ASA preferred, with 50–60% infill on the gears. Everything else is fine in PETG; the fan grill is the accent-colour piece.
What you have to source yourself
This is a files-only product — no printed parts, electronics, or hardware are shipped. The build guide carries the full bill of materials; the short version is standard printer-shop stock:
- H56UTR-style panel temperature controller
- MK8/CR-10 heater block with an M6 nozzle (large-bore or drilled for filament forming)
- 24V 40W heater cartridge and a 100K thermistor
- 4010 fan (24V), a 24V DC gear motor around 10–30 RPM, and a PWM speed controller
- 24V power supply, 5A or better
- Three 608-2RS bearings, M8 shaft/rod, M3/M4 fasteners, and wire
Print the faceplate first
One instruction sits at the top of the build guide in a box, and it is the most valuable page in the set: print the front faceplate first, before anything else. Temperature controllers vary by supplier, and the faceplate is the part that has to fit yours — the controller must drop into its window with the bezel covering the hole, and the knob bushing must pass through its hole. The faceplate is cheap and fast to print. If yours is off, you measure your controller, change one named variable in the source file, and re-print — instead of discovering the mismatch after printing the whole machine. That adjustability is the real reason the full set includes the parametric OpenSCAD source: every key dimension — controller cut-out, motor mount, spool, enclosure — is a named variable you can re-size to the parts you already own.
Honest expectations
- Bottle filament varies. Wall thickness differs from bottle to bottle, and strip quality depends on your cutting. This machine makes usable, printable filament — it does not make factory-tolerance filament, and we won't pretend otherwise.
- Some dimensions are assumptions. They were modelled from a reference build and are flagged in the guide with a measure-and-adjust table. Expect to check your hardware against them, and tweak a variable if yours differ.
- A bottle cutter is not included. The machine needs a continuous bottle strip to eat; cutting the bottle is a separate tool and a separate step. A cutter design is on our list as a future add-on.
- It is a project, not an appliance. Wiring a heater cartridge and tuning pull speed is normal 3D-printer tinkering — if you maintain your own printer, you already have the skills.
The file set, in our store
The set lives in the new Maker Machines section of our store, in two tiers:
- STL Set — $12.99: all 14 print-ready STL files plus the full build guide (BOM, per-part print settings, assembly order, wiring overview, tuning notes).
- STL + OpenSCAD Source — $24.99: everything above, plus the complete parametric source and the per-part preview renders — the version to get if your controller or motor differs from the standard parts, which is most of the time.
One thing to know before you ask: the machine sets are sold separately and are not part of the Maker File Club — the club is for our laser design packs, and membership doesn't include the machines. Both tiers are personal-use licenses: print and build for yourself as often as you like; selling printed kits or assembled machines needs a separate commercial license.
The verdict
If you go through bottles and own a printer, this is one of the most satisfying weekend builds in the hobby: the machine is printed, the feedstock is free, and every spool you wind is a bottle that didn't go in the trash. Go in with honest expectations — variable filament, a proof piece first, a little tuning — and it delivers exactly what it promises: a working recycler and a fun build. Start with the faceplate.
Our design files live in TheUnrulyMaker shop on Etsy and in our own store above; the physical finds — tools, parts, and liquidation gear — are in our eBay store, Easy401K Liquidations.